Till sidans huvudinnehåll
  • Stort lager
  • Egen utveckling
  • Kunskap

Full Fjädring Bussningssats

Produkten har flera alternativ


Artikelnr: STF-226121B
EAN-kod: 5902553520088
  • Beskrivning

    KIT ID: 226121B

    Namn Engelska: Full suspension bush kit

    Passar följande modeller:
    Audi S3 99-03
    Audi A3 96-03 8L Quattro
    Audi TT 99-03 Quattro

    Skoda Octavia I 96-04 4x4

    Seat Leon & Cupra R 4x4 99-05

    Volkswagen Bora 98-05 4x4
    Volkswagen Golf IV R32
    Volkswagen Golf IV 4x4
    Produkten inkluderar:
    2 x 221088B Front anti roll bar bush
    or
    2 x 221089B Front anti roll bar bush
    Storlekar:
    15,19,20,21,23mm
    2 x 221072B Front wishbone front bush (30mm)
    or
    2 x 221343B Front wishbone front bush (45mm)

    2 x 221344B Front wishbone rear bush
    or
    2 x 221077B Front wishbone rear bush

    4 x 221371B Rear wishbone inner bush
    4 x 221940A Rear tie bar to hub bush SPORT
    2 x 221372B Rear lower wishbone front mounting bush
    2 x 221445B Rear anti roll bar bush
    Storlekar:
    12,13,14,15,16,17,18,19,20,21mm
    2 x 221862B Rear diff mount - front bush
    2 x 221863B Rear diff mount - rear bush
    4 x 221864B Rear subframe bush

    Antal/Prod: 26

    Åtgång/Bil: 1

    Bildbeskrivningar:
    S2201
    S2202
    D2207
    D2208
    D2216
    S2206
    S2207

    NOTE!

     

    In the models in which the "steel cast arm" type arms were mounted, there are two types of front arm bushings. The earlier models were equipped with smaller Ø30mm bush (221072), whereas the later models had Ø45mm larger bush (221343).
    The rear bushing for this arm is 221344.

     

    For the "steel pressed / tin" arms, the matching bushes are: 221072 and 221077.

     

    Before ordering, please check the type of the arm carefully. In the case of the "steel cast arm", check the diameter of the front bush additionally (See photo S2201)!


    There are two types of front stabilizer bushing.
    OLD TYPE - 221088 or NEW TYPE - 221089
    Before buying check the type of bush and diameter.
    See picture S2202

    Bush 221940A is only available in 90ShA hardness (yellow) because the original rubber bush is made of a hard rubber compound.
    The use of the 80ShA hardness bush (red) will reduce the driving of the car to the original rubber bush.

    Hårdhet: 80ShA

    Material: POLYURETHANE (PUR/PU)

    Monteringsfett skickas med alla produkter!

  • Fråga om produkt

    Du får snabbast svar genom informationen i våra guider. Vi uppdaterar dem ständigt för att du skall få snabbast och bästa support.

    Gå till Guiderna här

  • Recensioner

    Bli först med att recensera denna produkt!

    Din recension:

    För att skicka en recension måste du vara inloggad.

  • Om tillverkaren

     

    ----------------
    Guider & Info