Styrvinkelkit BMW E36 Drift - PnP

Styrvinkelkit BMW E36 Drift - PnP

The subject of the sale is a customized lock kit for the BMW E36 - PLUG & PLAY.

The set has all the necessary elements for assembly.

Adapters are milled on CNC machines, which gives a high quality finish and 100% matching of the adapter to the steering knuckle and pin ends. For E36 the adapters are made of the hardest aluminum acc. To Polish standards. The control arm is cut with a laser and has precisely machined holes for pins and stabilizer mounting (we recommend its assembly for better driving of the car in skidding, especially when the suspension is not "concreted").

To install the set, you need to move the upper shock absorber mounting on your own (camber, relocator or E36 M3 pillow - the latter is recommended as a simple and reliable option).

When assembling the kit, nothing needs to be cut, welded or grinded, everything is Plug & Play, the operation is fully reversible, the body remains intact.

The price applies to the SET - PLUG & PLAY, which includes:

• LEFT front control arm - 1 piece
• RIGHT front control arm - 1 piece
• front left wishbone adapter - 1 piece
• front RIGHT wishbone adapter - 1 piece
• fastening screws - 6 pieces
• polyurethane tunnels - 2 pieces
• steering rods - 2 pieces
• pins with the installation - 4 pieces
• pads for mangle - 2 pieces

Track width
This kit makes the car ~60mm wider in total
Control arm is 2x ~20mm
Adapters are 2x ~10mm

Steer angle
Turn angle / drift angle is 55-65 degrees
It depends on wheel and tire setup as well as alignment and other external factors.

Camber
Camber can be adjusted from ~ -5,5 to -6,5 degrees using M3 top mounts or even more with after market adjustable camber plates. This can be limited due to external factors.